Fresh out of the kiln are several 2” cedar slabs from 3 different logs. I have 4-5 that are 6ft long. 4-5 that are 8ft long, and some that are 11ft long. Most are 10-14” wide. All have some voiding in them, but that is very common with cedar. These could be used as is, or could be epoxy filled. I offer epoxy services for those who would prefer to not do it for themselves.
I sell almost all local species for one low price of $5/bf across all grades. My mission is to become north-central Florida’s go-to source for hardwood lumber by making woodworking once again an affordable artform for hobbyists, professionals, and DIY’ers alike.
Im currently by appointment only. I’m generally onsite on Tuesdays through Saturday scheduling visitors from 12-5. Simply let me know what day/time would work best for you and I’ll get you on the schedule and send the address. I’m halfway between Jonesville and Archer off Cr241s.
I am the sawmill, I personally cut all lumber from local, sustainably sourced logs. All lumber is fully seasoned before advertising, and all hardwoods are kiln dried below 10% before being advertised.
I also offer custom milling of your logs if you have them.
Find my Facebook page by searching “the Florida Woodsmith”. Like my page to get updates when new lumber becomes available, I post all lumber to my page one week before advertising to the general public to give my followers a week at first choice.
Find me online at floridawoodsmith . Com for info on all services I offer.
I will have about 600bf in hardwood lumber and slabs coming up soon so stay tuned.
Contact me to set up your visit.