front end loader log / demo grapple - $2,500 (hawthorne / orange springs)
‹image 1 of 5›
condition: good make / manufacturer: varies model name / number: log loader grapple size / dimensions: 90"
QR Code Link to This Post
This was used on a John Deere 644E front end loader , might fit others as well . It measures 90" wide , previous owner welded x 1" thick x 4' deep plate on bottom of forks for use as i solid bottom grapple bucket . It can be cut off if you prefer open bottom as a log loader fork grapple as it was meant to be and i reduced price by $500 to accomodate that and replace the 1 hose that i would do if i were keeping it. . Very beefy , Very heavy , no wear on forks , bushing or pin holes . one cylinder rods looks as new , other has minor scratches that should polish out. no signs of any leaks. All hoses look good except the outer rubber coating one one is dry and mostly peeled off , should be replaced at some point. Loader arm pin size is 2 1/2" , center curl pin size is 3 1/8" . If sand blasted and painted it would look great, aging on a farm shows cosmetic issue only . price is cash and carry only please and is reduced to reflect the mentioned minor issues . My backhoe can only lift one end up at a time so best hauled on a ramp truck or tilt trailer as i used. I could not lift with my moffet 5k lb. forklift do too added weight of the 1" thick bottom plate. idd guess its over 5 - 6 k lbs. with this thick bottom plate . thank you 352-546-528two
Do NOT contact this poster with unsolicited services or offers.
